Hello,
On join request LNS provide the channel frequency list to End Device.
Does LNS also share the same channel frequency list with the Gateway?
Gateway shall enabled the same channels used by the LNS, so how this
information is shared with the Gateway, I am using "Semtech Packet Forwarder".
Or does the channel frequency list shall be same in both LNS and Gateway,
there is no such information exchanged with Gateway.
Regards
Piyush
If you are using the ChirpStack Concentratord, then ChirpStack will automatically re-configured your gateway with the correct channel-plan. For other packet-forwarders you need to configure the gateways manually.
Hi Orne Brocaar,
Thanks for the reply!
It means I have to manually configure the Gateway similar to LNS if I am using "Semtech Packet Forwarder".
If I go with Chirpstack Concentratord then Gateway should also support this.
What about Basic Station? Does it support what I need?
Regards
Piyush
